l High performance, low noise with excellent stability and low cost
l 16 constant-torque microstep settings, 60,000 steps per round the highest
l Unique control circuit, effectively reducing noise and increasing rotation smoothness
l 200Kpps response frequency
l After step pulse stops for 100ms, output current automatically change to 20~80% (based on STOP/Im setting)
l Bipolar constant current wave chopping mode, improve motor speed and power
l Photoelectric isolated signal input/output
l Drive current adjustable from 0.7A/phase to 7A/phase
l Sole power input, voltage range: AC110~220V
l Fault protection: over current, overheat, low voltage protection
l Small size: 200*156*90mm, 1.6kg
l Position memory function
YKC3722MA is identical-angle constant-torque microstep drive with working voltage AC110~220V. It’s designed for various models of three phase 86~130mm (NEMA 34~50) hybrid stepper motors which current are below 7A.
With a servo-similar control circuit, YKC3722MA can drive motors at low speed with almost no vibration or noise. Motor torque at high speed is much higher than two-phase or five-phase hybrid stepper motor.
