l  High performance, big high speed output torque with excellent stability and low cost

l  12/8 constant-torque microstep settings, 200 microsteps the highest

l  Unique six-wire control circuit, effectively increase high speed torque (double torque compared with four-wire drive)

l  200Kpps response frequency

l  After step pulse stops for 100ms, output current automatically halve to reduce motor heat

l  Bipolar constant current wave chopping mode, improve motor speed and power

l  Photoelectric isolated signal input/output

l  Drive current adjustable from 0.1A/phase to 4A/phase

l  Sole power input, voltage range: DC15~40V

l  Fault protection: over current, overheat, low voltage protection

l  Small size: 136*92*25mm, 0.3kg

Typical Application:
Mainly used in engraving machine, laser processing equipment, electronic equipment and advertising equipment.

YKA2404MA/B is identical-angle constant-torque microstep drive with working voltage DC15~40V. It’s designed for various models of two phase 6/8 wire 42~86mm (NEMA 17~34) hybrid stepper motors which current are below 4A.

With the uses of the first advanced six-wire technology, the motor will proceed Automatic Gain Control at high speed and reducing reverse EMF, thus greatly improve the torque output (double torque compared with four-wire drive) in high speed.

In applications which running speeds are not high, with the use of 200 microsteps, stepper motor will be operated under high accuracy, and low vibration/noise.

Product DiagramProduct Diagram

Micro SettingMicro Setting

Terminal AssignmentTerminal Assignment

file Explanation Download